SP COLOR CPE Series

SP COLOR CPE Series

— is a standard architectural polyester topcoat designed for outdoor use on HDG and aluminium. It is based on acid-catalyzed hot-setting melamine cross-linked saturated aromatic polyester. Also contains pigments, extenders, solvents and performance enhancers. The finished coating has medium gloss and demonstrates a good balance between hardness and flexibility and also strong weathering and UV-resistance.

TECHNICAL DATA
The data mentioned below is typical for this product and can be adjusted to customer demands. The mentioned performance is reached provided that high-quality products were used and all the necessary technical specifications were strictly followed at the preceding cleaning, pretreatment and primering steps before application of the top coat.

Viscosity DIN 4 mm Cup at 20°CDIN 5321190 ± 10 s
Density, LiquidISO 2811-11.25 ± 0.20 g/cm3
Weight SolidsISO 325160 ± 5 %
Spreading Rate-50 ± 10 g/m2
Solvent Blend-Aromatic fractions and glycols
Dry Film ThicknessDIN EN 13523-120 ± 2 µm
Gloss 60°DIN EN 13523-235 ± 6 gloss units
Pencil HardnessDIN EN 13523-4F – H
AdhesionDIN EN 13523-60 T
T-bendDIN EN 13523-61.0 – 1.5 T
Back Impact ResistanceDIN EN 13523-5≥ 10 J
Crosslinking (MEK Rubbing Resistance)DIN EN 13523-11> 100 double-rubs
Application conditions:
Recommended PrimerSP Color PPE series
Recommended ThinnerHigh-boiling aromatics, Solvesso 100
Wet Film Thickness40-50 µm
Peak Metal Temperature224-249°C